Custom Glass Fin Curtain Wall System for Commercial Buildings and Large Glass Facades
| Share | |
|---|---|
| Categories | Glass Fin Curtain Wall |
| Brand | FOWALL Curtain Wall System Supplier |
| Frame Type | Visible Frame Curtain Wall |
| Material | Tempered Glass + Laminated Glass Fins |
| Glass Options | Double Glazing / Laminated / Low-E |
| Structure | Frameless (Glass Fins as Structural Support) |
| Application | Commercial Buildings / Office Towers / Malls |
| Performance Standard | ASTM / AAMA |
Glass Fin Curtain Wall System
FOWALL’s Glass Fin Curtain Wall System is a high-performance architectural solution focused on Total Transparency via Vertical Glass Rib Load-Bearing Technology. Designed for landmark commercial and luxury residential envelopes, this system delivers an uncompromising synergy of structural precision and occupant comfort.
Our glass fins utilize multi-layered heat-soaked laminated glass with SGP (SentryGlas Plus) interlayers, providing 5x the strength and 100x the rigidity of traditional PVB [ASTM C1172]. The system is verified through [AAMA 501.1] dynamic pressure cycles to ensure zero structural fatigue or water bypass even in high-seismic zones.
Verified structural integrity for international codes.
Utilizing high-strength 6063-T5/T6 Aluminum or SS316.
AAMA 2605 compliant PVDF or Anodized RAL colors.
Full CNC & Laser-cutting for perfect project fit.
Project Application Gallery
Certified Performance Specification Table
| Parameter | Specification Detail | Reference Standard |
|---|---|---|
| Fin Reinforcement | Triple-Laminated SGP Glass | ASTM C1172 |
| Structural Support | Vertical Cantilever Ribs | FEA Simulated |
| Dynamic Sealing | Verified at 720 Pa (Dynamic) | AAMA 501.1 |
| Hardware Grade | Precision Cast SS 316 | Corrosion Resistance |
Professional Facade Engineering FAQ
The fins are top-hung from the building's structural slab using high-tensile steel connectors, meaning the glass remains in tension rather than compression, which maximizes its load-bearing efficiency for spans up to 12 meters.
By using SGP interlayers, the fin maintains structural post-breakage capacity, remaining upright and secured until professional replacement can be performed.
Yes. We utilize high-transparency structural silicone with a specifically calculated width-to-depth ratio to accommodate thermal expansion while maintaining a 100% airtight seal.
Absolutely. FOWALL provides custom SS 316 portal frames that bridge the glass fin structure to support heavy-duty entrance operators without compromising transparency.
Yes. Our glass fins can be faceted or manufactured as curved segments to follow the radius of the building's geometry while maintaining full structural continuity.
A: Yes. Every shipment is accompanied by a technical data package including Material Test Reports (MTR) and finish compliance certificates.
- 加载中···
- Name
- Phone
- *Title
- *Content