FOWALL engineers high-performance facade systems
Engineered Facade Systems
for High-Performance Building Envelopes
for reliable weather protection, energy efficiency, and long-term building performance.
SYSTEMFacade System Types
Explore our full range of facade systems designed specifically for modern commercial buildings.
A facade system does more than cover a building. It is the first line of defense against weather, the primary control point for energy and comfort, and the single largest visual statement of a project. For owners and contractors, getting the facade layer right early means predictable cost, fewer site issues and a building that performs as designed for decades. Checklist — the four performance dimensions every facade system must satisfy: Pressure-equalized system design with tested watertightness of up to 5,000+ Pa keeps rain, wind and driving moisture outside where they belong. Thermally broken aluminum framing and high-performance infill achieve system U-values as low as 0.27 W/m²·K, cutting HVAC load and supporting LEED, BREEAM and local energy-code compliance. Facade assemblies engineered for acoustic insulation up to STC 45, protecting tenants from traffic, airport and urban noise. Systems engineered to project-specific wind loads, seismic zones and coastal salt exposure, in line with local building codes and international test standards. Every FOWALL facade system is engineered, tested and documented to international building-envelope standards — then re-calculated for your project’s wind zone, climate and glazing configuration. The table below summarizes our verified system capabilities. Note: Values represent verified system-level capabilities. Final performance figures depend on project design, glass configuration and local building code requirements — our engineering team provides project-specific calculations with every quotation. Facade systems are specified building by building. FOWALL has delivered facade and curtain wall solutions across commercial, retail, hospitality and cultural projects worldwide — each engineered to its climate, code and program. Office towers demand facades that perform at height: tight weather performance, energy efficiency for premium lease ratings, and installation programs measured in months, not years. FOWALL panel and louver systems are engineered for high-rise wind regimes and phased installation, keeping the envelope on schedule while the interior trades progress. Retail facades live under constant use and constant attention. FOWALL cladding systems for malls and mixed-use complexes balance brand-led design with practical durability — impact-resistant panel systems, low-maintenance finishes and coordinated storefront integration that keeps retail environments fresh for years. A hotel’s facade sets the guest’s first impression — and the acoustic and energy performance that follows them to their room. FOWALL systems for hospitality projects combine signature facade design with the acoustic insulation (up to STC 45) and thermal control that protect both guest comfort and operating cost. Museums, civic centers and public buildings carry the highest expectation for architectural identity — and the strictest requirements for public-assembly safety and durability. FOWALL’s facade engineering supports distinctive, code-compliant envelopes, with stone and metal systems that age gracefully under decades of public use. At FOWALL, quality is a system, not a final inspection. Backed by 40+ years of aluminum manufacturing and a fully vertical production base, every facade system is controlled from raw material to export packaging — and documented at every step. Operations certified to ISO 9001 and ISO 14001, recognized as a National High-Tech Enterprise with China Green Building Product Certification. Our parent group co-authored national standards GB/T 5237 and GB/T 26014. Casting, extrusion, surface finishing (anodizing, powder coating, PVDF), CNC fabrication and factory assembly happen under one roof, under one quality system. Alloy batches, coatings and gaskets are verified against specification at incoming inspection, with records kept per project for full traceability. Machined tolerances and assembly fit are checked against shop drawings at every fabrication stage — profiles, drainage paths, gaskets and hardware. Mock-up and performance testing per ASTM, AAMA and EN standards — air infiltration, water penetration, structural performance — with complete documentation for local code submission. Factory inspection with photo reports before shipment, followed by professional export packaging engineered for sea freight worldwide. Shop drawings, BIM data, material certificates and installation manuals delivered with every order. FOWALL is the global facade brand of Daming Aluminum — a manufacturing legacy that began in 1985 in Shunde, Guangdong, as one of China’s earliest registered aluminum profile brands. Today, we engineer and deliver integrated curtain wall, facade, window, and door systems from our 50,000+ m² advanced manufacturing base in Zhaoqing, China, combining vertically integrated production with decades of architectural aluminum expertise. Daming Aluminum co-authored national standards GB/T 5237 and GB/T 26014, and became the first Chinese aluminum manufacturer to supply PVDF-coated curtain wall profiles to the Japanese market, supporting the Sendai project in 2007. No shortcuts on engineering. We commit only to what we can deliver. We build long-term partnerships, not one-time transactions. That commitment is why architects, developers, and contractors across North America, Australia, Africa, and the Middle East specify FOWALL — and why our facade systems are engineered to perform in demanding environments, including coastal humidity, typhoon loads, cold-climate energy requirements, and high-UV arid regions. Manufactured in accordance with internationally recognized quality and performance standards. Send us your architectural drawings or facade intent — our engineering team will respond with system recommendations, preliminary budget and a project timeline.
SYSTEMThe Facade System — Where Performance Meets Expression
Weatherproofing & Water Management
Thermal & Energy Performance
Acoustic Comfort
Structural Resilience
Performance Specifications — Verified Capabilities, Project-Calibrated Delivery
Performance Parameter
FOWALL System Capability
Wind Load Resistance
Engineered to project-specific wind loads; high-rise systems tested up to ±6,000 Pa in line with ASTM E330
Water Tightness
Pressure-equalized system design with tested watertightness of up to 5,000+ Pa (ASTM E331 / AAMA 501)
Air Tightness
Up to Class 4 air permeability in line with EN 12207
Thermal Performance
Thermally broken aluminum framing and high-performance infill with system U-values as low as 0.27 W/m²·K — supporting LEED, BREEAM and local energy-code compliance
Acoustic Insulation
Facade assemblies engineered for acoustic insulation up to STC 45 (≈ 45 dB)
Seismic Performance
Movement-accommodating connections engineered to project seismic zones and international test standards
Corrosion & UV Resistance
Marine-grade alloys and PVDF-coated finishes; surface finish warranty up to 20 years
Fire Performance
Fire-retardant core options for aluminum composite panels in code-sensitive applications
Applications — Proven Across Building Types
Commercial Office Towers
Shopping Malls & Retail Complexes
Hotels & Hospitality Buildings
Cultural & Public Buildings
Why FOWALLEngineering Driven Façades. System-Backed Delivery.
Consistency in strength, finish and tolerance
40+ years of aluminum manufacturing experience — stable quality from the source
Performance, safety and visual consistency
Systems engineered and tested to international facade standards, with project-specific wind load, thermal and structural calculation support
System compatibility and smooth installation
Complete systems — profiles, panels, glass, hardware and gaskets engineered to work together, with shop drawings, BIM data and on-site technical support
Cost and schedule certainty
Factory-direct supply, phased production planning and export-grade packaging for reliable delivery on global projects
Code compliance and certification
Systems documented for local building codes across North America, Australia, Africa and the Middle East, supporting LEED / BREEAM submissions
Quality Assurance — From Billet to Building Site
Certified manufacturing
Vertical integration, no anonymous subcontractors
Material traceability
In-process dimensional control
Performance testing support
Pre-shipment inspection & export packaging
Complete project documentation
About FOWALL — Four Decades of Engineering. One System-Backed Promise.
40+ Years of Aluminum Manufacturing Experience
A proven foundation in aluminum extrusion, surface finishing, and architectural applications, supporting consistent quality across global projects.
25+ Years of Curtain Wall Engineering Expertise
Specialized experience in designing and delivering high-performance facade systems for commercial buildings, high-rise towers, hotels, airports, and complex architectural developments.
50,000+ m² Integrated Manufacturing Base
A fully coordinated production facility covering aluminum processing, extrusion, surface treatment, precision fabrication, and system assembly — enabling reliable quality control, efficient delivery, and customized facade solutions at scale.
Standards We Helped Write
How We Work
CertificationsCurtain Wall Systems Quality Certifications
FAQ
Facade Systems FAQ
Common questions about FOWALL facade systems, customization, and project support.
What is the difference between facade systems and curtain wall systems?
Curtain walls primarily support glass, while facade systems include louvers, panels, and stone cladding. FOWALL provides both as integrated solutions.
Should I choose ACP or solid aluminum panels?
ACP offers lightweight and flexible design options, while solid aluminum provides greater rigidity and durability. FOWALL can recommend the right option for your project.
Can FOWALL facade systems be used in seismic areas?
Yes. Our facade systems can be engineered with movement-accommodating connections to meet project-specific seismic and local code requirements.
Can FOWALL provide shop drawings and installation support?
Yes. We provide shop drawings, BIM data, installation manuals, and technical support throughout the project.
Are FOWALL facade systems suitable for coastal or high-UV areas?
Yes. Marine-grade materials and PVDF finishes provide enhanced corrosion and UV resistance for demanding environments.
What do you need to prepare a facade quotation?
Simply send us your architectural or facade drawings. Our engineering team can provide system recommendations, budget guidance, and a preliminary timeline.
Start Your Facade Project with Certainty
From first sketch to site completion, FOWALL supports developers, contractors and consultants as a single accountable partner.