Green Building Submissions
Material and certification data to support LEED, Green Star and Estidama documentation on your project.
Thermal-break facade for LEED-ready performance.
ASTM/AAMA compliant high-rise walls.
Inter-story drift resistant earthquake systems.
Coastal and industrial envelope protection.
High STC/Rw systems for urban noise control.
Curtain walls, windows and doors for any climate.
Concept-to-construction value engineering.
Aluminum, glass and hardware engineering.
ASTM, AAMA, NFRC test data.
7-step QC from factory to facade.
On-time, on-budget delivery.
Third-party testing and full traceability.
Full BIM coordination visibility.
Systems, pricing and project support.
Selection guides and technology trends.
Production-to-shipment visibility.
40+ years of aluminum engineering.
30,000㎡ plant for OEM/ODM.
EPD & ISO 14067 carbon data.

Sustainability & Social Responsibility
Recovered aluminium scrap, on-site wastewater treatment, a verified EPD and carbon footprint for our aluminium profiles, and a workforce we house and look after. This page sets out what we do and which documents back it, so your team can use it for green building submissions, supplier ESG reviews and tender pre-qualification.
Request ESG DocumentationWho this page is for
Architects, consultants and procurement teams increasingly need more than a supplier's word. Each section below lists the documentation available on request.
Material and certification data to support LEED, Green Star and Estidama documentation on your project.
Clear answers on environmental management, wastewater, waste handling and labour conditions — with documents behind them.
Certificates, management-system records and factory audit access for international and government-funded projects.
A stable, experienced workforce and controlled processes mean consistent fabrication quality and fewer site issues.
Certifications & standards
Each credential below is listed under the company that holds it: FOWALL for our facade systems and products, and our long-term manufacturing partner DM Aluminum for the aluminium profiles and production processes behind them. Copies are available on request.
| Credential | Scope |
|---|---|
| CSA | Windows and doors to Canadian and US standards |
| NFRC | Certified energy performance ratings for windows and doors |
| AS 2047 | Windows and external glazed doors for the Australian market |
| Intertek third-party test reports | Independent facade system performance testing |
| Credential | Scope |
|---|---|
| Type III Environmental Product Declaration (EPD) | Architectural aluminium extruded profiles, to ISO 14025 |
| Product Carbon Footprint | Architectural aluminium extruded profiles, to ISO 14067 |
| China Green Building Material Product Certification (One Star) | Powder-coated architectural aluminium profiles |
Certificate copies, numbers and validity dates are available on request.
DM Aluminum has co-authored national and industry standards governing aluminium building profiles in China, including GB/T 5237 and GB/T 26014.
See how we verify performance →
Sustainable by design
A facade's largest footprint is the energy the building uses over decades. That is why our sustainability work starts at the drawing board, not the factory gate.
Thermally broken aluminium framing and insulated glazing units reduce heat transfer through the building envelope, cutting heating and cooling loads. Windows and doors in our packages are certified to CSA and NFRC standards.
Durable finishes and engineered sealing systems extend service life and reduce replacement cycles — the most effective way to lower a building's lifetime material use.
Aluminium can be recycled indefinitely without quality loss, at roughly 5% of the energy needed for primary production. Every facade we ship remains a material asset at the end of the building's life.
Green building contribution
Energy & Atmosphere: energy performance. Materials & Resources: product disclosure and recycled content.
Positive: energy use. Responsible: responsible products.
Resourceful Energy and Stewarding Materials categories.
Credit eligibility depends on each project's design and documentation. We provide the product data your consultant needs, including the EPD and carbon footprint for our aluminium profiles; your consultant should confirm how these are accepted under your chosen rating system.
Responsible manufacturing
Aluminium extrusion, finishing and fabrication use energy and water and generate scrap and residues. Here is how each one is managed at our Zhaoqing production park, together with our manufacturing partner, DM Aluminum.

01Closed-Loop Aluminium Recovery
100% scrap remelted on site
100% of the aluminium scrap from our production is remelted on site. Extrusion remnants, cutting offcuts and CNC chips go back to DM Aluminum's casting line within the same production park and are made into new profiles. Nothing from our cutting process goes to landfill.
Available documentation: casting and recovery records.

02Energy Management
Energy use is monitored for every finishing process — powder coating, PVDF coating, anodising and electrophoretic coating — down to unit consumption per tonne of product.
Available documentation: energy management records and unit energy performance by product line.

03Wastewater Treatment
Up to 1,000 tonnes per day
DM Aluminum invested over RMB 20 million in an on-site wastewater treatment centre that can process up to 1,000 tonnes of industrial wastewater per day. Rinse water from anodising and pre-treatment is collected and treated on site before discharge.
Available documentation: treatment capacity statement, discharge permit and monitoring records.

04Sludge Handling
Sludge from wastewater treatment is dewatered on site by filter press, reducing its volume before it leaves the park, and is handled as a controlled waste stream.
Available documentation: controlled-waste records.
Treatment capacity statements, discharge permits, monitoring and waste records are available on request.
More on our facility →
Our People
Facade quality depends on experienced fabricators and glaziers who stay. We house our team on site, train them continuously and pay them on time — because a stable workforce is the most reliable quality control we have.
Why it matters. For your project, fewer staff changes mean more consistent framing and glazing — fewer leaks, less rework and less schedule risk on your facade package.
Community
Our responsibility extends into the communities around our manufacturing operations through targeted support, stable local employment and practical vocational development.

Community Support
DM Aluminum participated in the Guangdong–Guangxi Pairing Poverty Alleviation Initiative supporting Zhaoping County and was recognised as an Exemplary Private Enterprise.

Regional Impact
Our manufacturing operations support stable local employment and create long-term roles across production, quality control, engineering and logistics.

Skills Development
Practical skills development and on-the-job training help people progress while strengthening the technical capability available to regional manufacturing.
Figures at a glance
Consolidated for anyone completing a supplier questionnaire.
| Indicator | Value | Documentation |
|---|---|---|
| Wastewater treatment capacity | Up to 1,000 t/day | Capacity statement |
| Wastewater treatment centre investment | RMB 20M+ | Investment record |
| Production scrap remelted on site | 100% | Casting records |
| EPD and carbon footprint validity | Until Feb 2028 | EPD; carbon footprint certificate |
Questions buyers ask
Yes. Our facades can support energy-performance and material-related credits, depending on your project's design. We supply certification documents, product data and recyclability information for your consultant's submission.
Yes. The architectural aluminium profiles used in our systems are covered by a Type III EPD and a product carbon footprint certified to ISO 14067, both valid until February 2028. Ask us for copies; your consultant can confirm how they apply under your rating system.
All aluminium scrap from our production is remelted on site and made into new profiles.
DM Aluminum operates an on-site wastewater treatment centre at our Zhaoqing production park, built with an investment of over RMB 20 million, with capacity of up to 1,000 tonnes per day. Water is treated before discharge in line with the applicable standard.
Yes. We welcome client visits and support factory inspections by clients or client-appointed third-party inspection companies.
FOWALL leads engineering, system coordination, quality control and delivery. Aluminium extrusion, surface finishing and upstream manufacturing come from our long-term strategic manufacturing partner, DM Aluminum. Both operate within the integrated Zhaoqing production park.
Yes. More detailed records can be shared under a non-disclosure agreement where required.
Documentation request
Tell us what your form or rating system asks for, and we will send the matching documentation.