Visible Face Options
Visible face width affects the exterior sightline and architectural appearance of the facade grid.
Series60 mmSeries70 mmSeries80 mm
Clarity Is Visibility
Home / All / Curtain Wall Systems / Framed Curtain Wall Systems / Visible Curtain Wall / Visible Frame Curtain Wall System | Captured Aluminum Glass Facade for Commercial Buildings
Visible Frame Curtain Wall System | Captured Aluminum Glass Facade for Commercial Buildings
| Share | |
|---|---|
| Categories | Visible Curtain Wall |
| Brand | FOWALL Curtain Wall System Supplier |
| Frame Type | Framed / Visible Frame（Pressure-Plate System） |
| Material | Aluminum Alloy 6063-T5 / T6 |
| Glass Options | Insulated Glass Unit (IGU) / Laminated Glass / Low-E Coated |
| Surface Finish | Powder Coating / Anodizing / PVDF (Fluorocarbon Coating) |
| Structure | Sightline 60-80mm (2.4-3.1") / Depth 120-200mm (4.7-7.9") |
| Application | Commercial Office Buildings / Mid-Rise Buildings / Retail Facades |
| Performance Standard | AAMA 501 / ASTM E283 / ASTM E330 / ASTM E331 |
Detail Information
The existing page header, product gallery and product summary above this point remain unchanged.
Detail Information
FW-V Series
Visible Frame Curtain Wall System
FOWALL's Visible Frame Curtain Wall System is an aluminum-framed facade solution with exposed mullions and transoms forming a clearly defined exterior grid.
Glazing is mechanically retained using pressure plates and exterior cover caps, creating a structured architectural appearance while allowing the system to be configured for different glass, profile, finish and performance requirements.
Built as a system
Profiles, components and anchoring solutions are selected for each project's facade dimensions, wind loads, glazing configuration and architectural requirements.
Pressure-plate glazing
System Selection
System Series & Configuration Options
Visible face and mullion depth options can be freely combined to suit different architectural sightlines and project-specific structural requirements.
Mullion Depth Options
Mullion depth is selected according to facade span, wind load, glazing weight and structural conditions.
Series120 mmSeries150 mmSeries200 mm
| Visible Face / Mullion Depth | 120 mm | 150 mm | 200 mm |
|---|---|---|---|
| 60 mm | Available | Available | Available |
| 70 mm | Available | Available | Available |
| 80 mm | Available | Available | Available |
All visible face options can be combined with any mullion depth option. These are structural selections, not product grades. Our engineering team recommends the appropriate combination during project review.
Coordinated Components
Curtain Wall System Architecture
Every component works as part of the facade system to transfer loads, retain the glazing, manage water and maintain the designed appearance.
FW-V visible frame curtain wall system reference.
M
Mullion
Primary vertical framing member that transfers facade loads to the building structure.
T
Transom
Horizontal framing member supporting the glazing and connecting to the vertical mullions.
P
Pressure Plate
Mechanically secures the glazing to the framing system as part of the retention assembly.
C
Cover Cap
Exterior aluminum cover that conceals the pressure plate and defines the visible facade profile.
E
EPDM Gaskets
Provide continuous sealing around the glazing and support air and water management.
D
Drainage System
Internal drainage paths help manage incidental water within the curtain wall assembly.
A
Anchoring System
Connects the curtain wall framing to the building structure and transfers design loads.
Product Characteristics
Key Features
Expressed Architectural Grid
Exposed mullions and transoms create clearly defined vertical and horizontal facade lines.
Pressure-Plated Glazing
Mechanical pressure plates retain the glazing while exterior cover profiles define the sightline.
Flexible Glazing Configurations
Compatible with insulated, laminated, tempered and Low-E glass, subject to project requirements.
Integrated Water Management
Internal drainage paths and perimeter sealing help manage incidental water within the system.
Customizable Exterior Profiles
Cover caps and framing profiles can respond to required sightlines and architectural conditions.
Project-Specific Structural Design
Sections, anchors and connections are selected for dimensions, loads and applicable requirements.
Building Envelope
Performance & Building Envelope
Curtain wall performance depends on the complete system, including profiles, glazing, gaskets, sealants, drainage, anchoring and installation.
Wind Load Resistance
Engineered according to project-specific wind pressures, spans, building height and structural requirements.
Air & Water Management
Drainage paths, gaskets and perimeter sealing work together to manage infiltration and incidental water.
Thermal Performance
Thermal-break options and insulated glazing can be incorporated where improved performance is required.
Acoustic Performance
Laminated, insulated or asymmetric glazing can support project-specific acoustic requirements.
System Data
Technical Specifications
| Specification | Details |
|---|---|
| System Type | Visible Frame Curtain Wall |
| Framing System | Aluminum Mullions & Transoms |
| Glazing Method | Pressure Plate & Cover Cap |
| Exterior Frame | Exposed |
| Aluminum Alloy | 6063-T5 / T6* |
| Visible Face | 60 / 70 / 80 mm |
| Mullion Depth | 120 / 150 / 200 mm* |
| Glass Options | Tempered / Laminated / IGU / Low-E |
| Glass Thickness | Project-Specific* |
| Thermal Break | Available Options* |
| Gasket | EPDM |
| Surface Finish | Anodized / Powder Coating / PVDF |
| Drainage | Pressure-Equalized / Project-Specific* |
| Application | Commercial / Institutional / Hospitality / Residential |
* Final values and available options are confirmed against the approved project configuration.
Adaptable by Design
System Configuration Options
Frame Depth
Different mullion and transom depths can be selected according to structural requirements, glazing weight, span and facade geometry.
Glazing Options
Glass build-ups are coordinated according to envelope performance, safety, appearance and project requirements.
Cover Cap Options
Cover cap profiles can be selected or developed to achieve different exterior appearances and facade rhythms.
Surface Finishes
Finish systems and colors are coordinated with project exposure, appearance and maintenance requirements.
Where It Works
Typical Applications
The visible frame curtain wall system is suited to projects where a clearly expressed aluminum facade grid is part of the architectural design.
Commercial BuildingsOffice BuildingsHotels & HospitalityRetail & Shopping CentersInstitutional BuildingsResidential Developments
From Review to Delivery
Engineering Support for Project Requirements
FOWALL supports project teams with technical coordination and system-specific engineering for curtain wall applications.
System Selection
Profiles, glazing configurations, finishes and system options coordinated to project requirements.
Structural Coordination
Project-specific consideration of spans, wind loads, glazing weight, anchoring and structural requirements.
Shop Drawings
Detailed fabrication and installation drawings developed to approved project requirements.
Material & Finish Coordination
Coordination of profiles, glazing, surface finishes, gaskets, hardware and related components.
Production & Quality Control
Controlled fabrication, inspection, assembly, glazing and pre-shipment quality checks.
International Delivery
Protective packaging and project-specific logistics coordination for overseas shipments.
Controlled Process
Quality & Verification
Material Inspection
Key materials are inspected and documented before production.
Quality Control
Fabrication, assembly and glazing stages are monitored against approved requirements.
Performance Testing
Air, water, structural and other project-specific testing can be arranged.
Pre-Shipment Inspection
Finished products are documented before protective packaging and loading.
Project Resources
Technical Documentation
Technical documentation is available on request and coordinated with the selected system and project scope.
Technical DatasheetSystem data and available configuration information
PDFSystem Sections & Typical DetailsRepresentative sections, junctions and anchoring details
PDF / DWGPerformance Test ReportsAvailable where applicable to the selected configuration
On requestMaterial & Finish InformationAluminum, glazing, gasket and finish documentation
PDFBIM / CAD FilesProject coordination resources where available
On requestTechnical Answers
Frequently Asked Questions
What is a visible frame curtain wall system?
It uses exposed aluminum mullions and transoms on the exterior of the facade, creating a clearly defined architectural grid.
How is the glass retained in the system?
The glazing is mechanically retained using pressure plates and exterior cover caps, together with gaskets and sealants as required by the system configuration.
Can the glass specification be customized?
Yes. Glazing can be configured according to project requirements, including insulated, laminated, tempered and Low-E glass options.
Can the mullion depth be customized?
Mullion and transom sections can be selected according to span, wind load, glazing weight and project-specific structural requirements.
What surface finishes are available?
Available finishes may include PVDF, powder coating and anodizing, with color and finish selection coordinated according to project requirements.
Can FOWALL provide structural calculations?
Project-specific engineering support and structural calculations can be provided according to project requirements and applicable design standards.
Can the system be customized for different building designs?
Yes. The system can be configured for different facade dimensions, glazing types, cover cap profiles, finishes, corners and architectural requirements.
Can FOWALL provide installation drawings and technical documentation?
Yes. Technical documentation, shop drawings and project-specific details can be provided according to the project scope.
Related Solutions
Explore Other Curtain Wall Systems
Project Inquiry
Planning a Curtain Wall Project?
Share your drawings, project requirements or preliminary specifications with our facade engineering team. We can help review the system configuration, glazing options and technical requirements.
Review
- 加载中···
Please send your message to us
- Name
- Phone
- *Title
- *Content
Clarity Is Visibility